Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 3 (2004)

Marvin Henry

Marvin Henry, Box 9, Maywood, Neb. 69038 ph 308 362-4251

“I recently started manufacturing a magneto coupling for regular Farmall tractors. This coupling also fits International Harvester 10-20 and 15-30 series tractors and maybe others. These tractors were built from 1924 to about 1932.

“The coupling is about 1 1/4 in. long and goes between the drive mechanism off the engine and the magneto. It has two prongs on one end and two slots on the other end. Over time, both the prongs and the slots get worn bad and then the magneto gets out of time. I’ve been told that it’s hard to find a replacement coupling, and if you do find one it will probably have a lot of wear. It sells for $28 postage paid.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.