Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 3 (2004)

Pat Prom

Pat Prom, Eden Prairie, Minn.

“I used 1/4-in. thick scrap metal to build my own 5 1/2-ft. high engine hoist. The hoist is raised and lowered by a 5-in. dia., 3-ton hydraulic cylinder. I use it to lift engines and transmissions out of cars and to raise the front end of garden tractors so I can change the mower blades. Anyone wanting to build a hoist for use with trucks and tractors would want to build a little bigger hoist.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.