Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 28, No. 5 (2004)

Do-It-Yourself Soft-Jawed Vise

Featured source:

Here’s an oldie but goodie that we spotted recently in an auto repair magazine.

When you’ve got a soft part to put into a vise, it’s always tricky to keep from bending or crushing whatever you’re working on. A good alternative is to make your own soft-jawed vise.

You can make one out of a single piece of 2 by 8 pine and it’ll be easier and quicker to use than a conventional vise.

You cut the wood as shown in the diagrams and then bolt the two stationary pieces to the top of your work surface. The third piece simply slides in to wedge itself against the part you want to hold. You can give it a couple taps with a hammer to lock it in place.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.