Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 4 (2005)

Bill Reeks

Individual tip 1 of 5 from this reader’s published contribution.
Bill Reeks, Cromwell, Ky.

“I have arthri-tis so I always have to find a better way to do things. I’ve discovered that using a bar or pipe clamp with my drill makes it much easier to drill through heavy steel. The whole idea works similar to a drill-press. The drill gets a helping hand from a pipe clamp, which adds the necessary pressure for the bit to cut. I just slowly tighten the threaded part of the clamp. A length of wire around the drill and pipe clamp helps to steady the drill motor and clamp.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.