Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 4 (2005)

W.A. Gibbs

Individual tip 1 of 2 from this reader’s published contribution.
W.A. Gibbs, Elmwood, Tenn.

“When I lost the ignition key to my 1958 Chevrolet 2-ton dump truck, I was able to come up with a simple, low-cost solution without ever touching the old ignition switch. It was a lot easier than putting in a new ignition switch, and cheaper.

“The truck has an external resistor mounted separately on the engine firewall. I bought a heavy duty industrial type ignition switch which came with one ignition terminal and one battery terminal, and that’s all I used from it. Starting from the battery side of the new ignition switch, I ran a no. 10 wire straight back to the battery. From the ignition side of the new switch I ran another wire straight to the feed-in side of the truck’s ballast resistor.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.