Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 6 (2005)

Gary Elston

Individual tip 3 of 3 from this reader’s published contribution.
Gary Elston, Mulvane, Kansas

“A good way to repair broken wiring is to strip the two wires to be joined, then solder them and use heat shrink tube to seal the fix. A better and simpler fix is to pick up a pack of butt connectors with the solder already inside the heat shrink tube. Strip the wires to be joined, crimp on the connector in the normal fashion, and use a lighter to heat up the connector. The solder will melt to the wire strand for a sure connection, and the outer sleeve will shrink down to make a weather-tight seal. The connectors cost a little more, but the time and money you’ll save later will make it worth the extra expense.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.