Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 6 (2005)

Gary Noblit

Individual tip 1 of 2 from this reader’s published contribution.
Gary Noblit, Jonesville, Mich.

“The bolts that held the starter in place on my Deere 6300 tractor kept vibrating loose. The starter is very hard to reach so it’s difficult to tighten up the bolts. To solve the problem, I replaced the bolts with studs. The studs are threaded on each end. I put two nuts on the outside end of the stud and then ran it as tight as I could into the bolt hole. Then I took the nuts off, replaced the starter and put the double nuts back on. I made this change more than a year ago and it completely solved the problem.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.