Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 6 (2005)

Danny Hege

Danny Hege, Olar, S.C.

“It’s amazing how much money you can save by doing your own repair work with just a welder and a cutting torch. For example, when the feed roll disintegrated on our Case IH 881 forage harvester, we made the repair ourselves. About half of a 6-in. dia. pipe that served as the feed roll had worn through. We removed the feed roll and cut it apart, then welded in a length of irrigation pipe as a substitute for the original. It saved us a lot of money.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.