Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 29, No. 6 (2005)

New Shop Tools Make Work Easier

Featured source:
New Shop Tools Make Work Easier
Photo: FARM SHOW · Vol. 29, No. 6 (2005) · p. 38

If you hate having to size your vise grip to fit every nut, then you’ll be interested in the LockJaw Automatic Locking Pliers. Thanks to a special locking mechanism, it adjusts to fit thick and thin nuts with the same amount of pressure each time.

It’s available at Ace Hardware (www.acehardware.com) and select Home Depot stores for between $20 and $25.

Contact: FARM SHOW Followup, LockJaw, LLC, P.O. Box 285, Crystal Lake, Ill. 60039 ([email protected]; www.lockjawpliers.com).

The Extractor pulls nails, staples, screws and other fasteners much faster than a hammer or crowbar.

Its nose lets you grip the complete fastener and roll it out without bending it instead of jerking at an angle. Because it has serrated teeth, it can also pull out screws without stripping them.

Sells for between $20 and $30 online and at different retailers.

Contact: FARM SHOW Followup, Jefferson Tool, LLC, P.O. Box 31535, Charleston. S.C. 29417 (ph 843 556-0455; fax 843 556-0687; [email protected]; www.nailextractor.com).

Thanks to the Bionic Wrench, you can throw out many of your box end wrenches and put away the vice grip or pliers. This tool has a multi sizing hex head.

The 8-in. tool replaces six box end wrenches from 7/16 to 3/4 in. (or 10 metric sizes - 11 to 20 mm).

Sells for about $29 plus S&H.

Dan Brown with Loggerhead Tools says a 6-in. tool to replace 12 wrenches between 1/4 in. to 1/2 in. (6 metric sizes - 7 to 12 mm) will be on the market in Jan. 2006. In March 2006, the company will introduce a 10-in. tool which covers 8 sizes between 3/4 in. to 1 1/4 in. (10 metric sizes - 19 to 30 mm) wrenches.

Contact: FARM SHOW Followup, Loggerhead Tools LLC, 208 South LaSalle St., Suite 189, Chicago, Ill. 60604 (ph 888 564-4374 or 312 419-1091; fax 312 251-5154; www.loggerheadtools.com).

Forget about finding the right socket or open-end wrench the next time you change oil. The Multi Oil Wrench fits oil pan plugs for up to 95 percent of all domestic and import cars, light trucks and other motors.

Although the 8-in-1 wrench was designed with the service mechanic in mind, it makes a handy addition to any toolbox. A rotating head on each end of the wrench has four mounted sockets for a total of 8 different sizes. The rotating socket heads allow the wrench access to spots hard to reach with standard wrenches.

The Multi Oil Wrench is made from drop forged steel and priced at $34.55. It comes with a lifetime warranty. Distributor Innovative Products of America (IPA) promises to repair or replace any wrench that fails because of workmanship or material within 24 hours. Contact: FARM SHOW Followup, Peter Vinci, IPA, P.O. Box 266, Mt. Tremper, N.Y. 12457 (ph 845 688-2300 or 888 786-7899; fax 845 688-2400; [email protected]; www.ipatools.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.