Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 4 (2007)

Elmer Pinkerton

Elmer Pinkerton, Elmwood, Neb.

“In a recent issue Art Gomez of Scott City, Kansas, found a way to install a fuel pump on his V-8 engine. I’ve been a mechanic all my life and have come up with an easier way.

“Many V-8 engines have a fuel pump that doesn’t reach the camshaft so there’s a short shaft between. It often is slanted and will fall out, making assembly difficult. There’s usually a bolt in the front face of the engine that lines up with the shaft at a 90 degree angle. I remove that bolt and insert a longer, all-thread bolt that’s long enough to hold the shaft in place and keep it from falling out. Don’t forget to remove the long bolt and re-install the original bolt.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.