Sometimes a good tool can be improved by the way it’s set up. Mel Primrose’s 14-in. metal chop saw is one example of this.
He mounted a bracket between two sec-tions of work bench. The bracket holds the saw so that it’s flush with the table.
“On the right side table, I mounted a wooden straight edge with an adjustable ruler on it (slide block) that I can adjust to cut different lengths, up to a maximum of 5 ft.,” he explains.
“On the left side, to guide the metal into the saw, I mounted a piece of aluminum angle iron to the table. If you want to cut up 20 pieces of metal to all the same length, you don’t have to guess. You just put them in and do it, and you know they’ll all be the same.”
Another nice feature of the setup is that the saw just sits in the bracket and Primrose can lift it out and take it to another location if he needs to.
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.