Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 31, No. 5 (2007)

“T-Handle” Socket Set

Featured source: David Novotny

By making use of some used deep well sockets he bought at a sale and some 3/8-in. steel rod and old rebar, David Novotny made a set of “T-handle” socket sets.

“At first I made just a couple of T-handle sockets and used them when working on lawn mowers and small engines. They worked so well that I decided to make a complete set.”

He welded the rod and rebar onto each socket to form a handle about 1 ft. long, with a 5-in. long cross “T” at one end. The shaft on one T-handle was made from a long 3/8-in. dia. bolt, with a drill chuck mounted onto one end of it.

“It works well for holding taps to clean out threads,” says David.

He also attached 13/16-in. and 3/4-in. deep well sockets onto the handles of a set of pliers “for working on the most common small engine spark plugs”. And he made a 3-way socket by welding three sockets together at the middle.

Contact: FARM SHOW Followup, David Novotny, 407 Ramona Ave., West Fargo, N. Dak. 58078 (ph 701 730-8627).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.