Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 1 (2008)

Dan Moore

Dan Moore, Billings, Montana

“I did a lot of body work on my Deere H tractor, then had a friend spot weld new grill screens to the sides of the tractor. He did a good job. However, once the work was done I had to do more body work over the welded spots next to the grill panels. I thought there had to be a better way, so I tried something new on my next tractor. I measured and marked where the screen should go, then put body filler into the base, and before the body filler was able to harden I pressed the screen down into the filler. Then I covered the edge of the screen with another thin coat of body filler. In effect, the screen is molded into the body filler. The body filler is so strong that once it sets up, you can’t pull the screen out.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.