Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 2 (2008)

Jim Lacey

Jim Lacey, Dell Rapids, S.Dak.

“A few years ago, a fuel filter plugged on one of our Dodge Cummins pickups. It cost us $2,000 to replace the injection pump. After that I put a gauge in the line after the filter, so I could be aware of dropping fuel pressure and know when to change the filter without guessing. I’ve found that when the pressure drops 3 psi under load it’s time to change the filter.

“This gauge cost less than $30 and took only a little time to install. I think it was a pretty good investment. The gauge is fastened to the top of the dash so it’s easily visible.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.