Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 4 (2008)

Don Catron

Don Catron, Box 357, Bridgeport, Neb. ph 308 262-0600

“I built this portable, foot-operated ‘safety power cord’ and use it to operate my drill press. It’s made from a limit switch off a Valley center pivot irrigation system, an electrical outlet box, and an extension cord. I bolted the limit switch onto one end of a small flat metal plate and the limit switch to the other end and then wired them together. The extension cord plugs into any wall outlet.

“I plug the drill press into the plate-mounted outlet and step on the limit switch to turn the drill press on or off. That way my hands are free at all times to operate the drill press. If something goes wrong, all I have to do is lift my foot off the switch to shut off the power. Eliminates the need to reach up and turn the switch off on the drill, which is really handy if I’m holding something and the drill bit catches.

“I can use this idea to operate any kind of power tool. Just don’t use a 3-prong outlet as it could be dangerous. Unfortunately it’s getting hard to find two-prong electrical plug-in boxes.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.