Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 4 (2008)

Mike Toppen

Mike Toppen, P.O. Box 138, Burnips, Mich. 49314 (ph 269 673-5597; [email protected])

“I recharge dead batteries with distilled water. I just replace the acid with water, which dissolves the sul-furic acid crystals that build up on the battery plates. It’s the crystal buildup that keeps the battery from recharging, and they don’t dissolve as readily in acid. After hooking the charger up a couple of times, the water has turned acidic, and I replace it with fresh sul-furic acid.

“The recharge works about 50 percent of the time, as long as the dead battery hasn’t been treated with other products. I even use it on so-called no-maintenance batteries. When they seem dead, they’re often just out of liquid. I drill a pinhole and inject water with a syringe, then seal it with silicone, a stainless steel screw or even duct tape. I figure if the battery is already shot, all I’m out is a little water if it doesn’t work.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.