Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 5 (2008)

Larry Hudson

Larry Hudson, Calhoun, Ky.

“I have a 4020 Deere tractor and it has a clear open platform which is nice. The problem I have had is that when you have to remove the platform to get to the battery cables and other components, the platform has four bolts - one in each corner. Each bolt has a spacer to hold the platform up off the cables and oil lines. When you remove the bolts, the spacers fall over and the holes fill up with dirt. To solve this problem, I use four pieces of all-thread rod. For each bolt I remove, I insert an all-thread bolt and finger tighten it. I then re-move the platform and it is ready to go back without anything being out of place.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.