Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 5 (2008)

“6-Stroke Engines” Use Waste Heat

Featured source: Bruce Crower / Roger Bajulaz

Countless inventors all over the world are trying to use water to make hydrogen they can run in their 2 and 4-stroke engines. Bruce Crower took a different tack. He decided to make an engine that uses petroleum fuel in its first four strokes and water in strokes five and six. Essentiallly, what he does is capture and use engine heat.

Crower injects water into the cylinder after the exhaust from the gas ignition strokes is exhausted in the fourth stroke. As the water turns instantly to steam, expanding by a factor of 1600, the pressure carries the cylinder through a fifth stroke with the steam being expelled in the sixth stroke.

The effect is to both capture cylinder wall heat for use as power and also to cool the cylinder down. Crower found he could eliminate the normal engine cooling system on the prototype single cylinder diesel he has experimented with.

Crower described the benefits of this to Pete Lyons in a December 2006 article in AutoWeek, “Can you imagine how much fuel goes into radiator losses every day in America? A good spark-ignition engine is about 24 percent efficient, i.e. about 24 cents of your gasoline dollar ends up in power. The Roger Bajulaz from Switzerland took a different tack to the challenge nearly 20 years ago and continues to refine it today. His company, Bajulaz S. A., patented a 6-stroke engine that uses heated air in a cylinder head modified with a combustion chamber inside an air chamber. Heated air from the cylinder charges a combustion chamber as fuel is injected. After ignition, the high pressure is released into the cylinder for an expansion stroke. The heat released at ignition heats the air in the surrounding air chamber, pressurizing it for release to power an additional stroke.

Bajulaz claims thermal efficiency of 50 percent versus 30 percent for traditional internal combustion engines, 40 percent re-duced fuel use, direct injection and optimal fuel combustion at every engine speed. Plus, the company claims almost any type of petroleum or vegetable oil, even animal grease, can be used in the system. This could reduce emissions by 60 to 90 percent.

rest goes out in heat loss through the exhaust or radiator and driving the water pump and the fan and other friction losses.”

Crowder, an experienced inventor and engineer, was sidelined by health issues re-cently. His brother David Crower recently told FARM SHOW that Bruce’s project is on hold until his return.

Contact: FARM SHOW Followup, Bruce Crower, Crower Cams & Equipment Co., Inc., 6180 Business Center Court, San Diego, Calif. 92154 (ph 619 661-6477; fax 619 661-6466; www.crower.com).

Aside from the head, Bajulaz claims no significant modification would be needed to a standard engine design. Like Crower’s engine, the cooling system is reduced. Bajulaz S. A. projects that were a company to adopt the design, cars with it could be on the market within three to five years.

Contact: FARM SHOW Followup, Bajulaz S. A, Matutina Parc, 22 Ave. du Bouchet, 1209, Geneva, Switzerland ([email protected]; www.bajulazsa.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.