Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 32, No. 5 (2008)

Mike Toppen

Mike Toppen, Burnips, Mich.

“With all the interest in wind power, lots of people are taking old car alternators and rebuilding the armature for use on a homemade windmill. I’ve found that by using high power permanent magnets, I can improve power production at lower wind speeds. I press apart the armature and pull out the field coil. Then I repack the field with the magnets and rewind the stator with extra wire. I find these two changes let me produce 13 volts at around 200 rpm compared to the same charge at the 250 rpm speed recommended with a traditional rebuilt alternator.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.