Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 2 (2009)

John Stava

Individual tip 1 of 3 from this reader’s published contribution.
John Stava, Bloomington, Ind.

“After retiring from the U.S. Air Force, I worked for a man who operated a small engine shop for many years. I learned many things from him, but one stands out: Don’t use starting fluid to start a small engine. These products contain drying agents, and repeated use will ruin a small engine quicker than Jack can climb the bean stalk. Instead, spray a small amount of WD-40 or fill a squirt-type oil can with the engine’s recommended fuel. Squirt in a few drops through the carburetor or re-move the spark plug and inject it directly into the cylinder. Two or three pulls and the engine should start.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.