“In the last issue of FARM SHOW, a reader described how to rotate a dead tractor engine by placing another tractor back to back with a driveshaft between the two pto shafts. A transmissioin with its shift lever in reverse was used in the driveline in order to rotate the engine in the right direction.
“I’ve used this approach several times but without the extra gearbox. Some years ago Massey Ferguson tractors featured what they called a ‘ground-drive’ pto position for the selector lever. In this position, the pto shaft was rotated by the rear axle gears.
“Using one of these tractors, with the left rear wheel jacked clear off the ground and the transmission in reverse, rotates the pto backward, which turns the dead engine in the right direction. For safety, operators should remain on both tractors. Many pto-driven generators have driveshafts with 1 3/8-in. U-joints at each end, which is ideal for this purpose.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.