Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Issues / Vol. 33, No. 3 (2009)

Vol. 33, No. 3 (2009)

Money-Saving Repairs & Maintenance Shortcuts · Printed section pp. 36–39

29 selected entries · Complete text of selected entries

This issue’s section includes reader tips and feature-length shop stories. Held items and editorial notices are not reproduced.

Archive text: prices, coupons, availability and contact details reflect the original publication, not current offers. Reader methods are not universal instructions; follow manufacturer guidance and proper safety practices.

Reader shop tips

From the archive · Full text
Reader shop tip

Elmer Pinkerton

Elmer Pinkerton, Elmwood, Neb.

“When welding and cutting, it’s quite a chore to keep changing torches and resetting the oxygen gauge. I made it a lot easier by installing a T fitting on the oxygen tank and fitting it with a second gauge and another set of hoses. Now I can drop one and pick up the other. There’s no need to reset the acetylene gauge.”

From the archive · Full text
Reader shop tip

Mark Eilers

Mark Eilers, Tower Hill, Ill.

He came up with a lightweight metal brake that fits onto the front edge of his workbench. He first lag-bolted a long piece of 1/4-in. thick steel plate to the front edge of the bench, leaving a thin space underneath it. For the break plate, he used a heavy piece of angle iron that’s fastened to the front edge of the bench with door hinges. Then he attached a short length of metal pipe to the angle iron to give him the leverage to bend metal. He slips a sheet of metal under the steel on the bench and bends it up with the angle iron.

From the archive · Full text
Reader shop tip

Glen Teel

Glen Teel, Hays, Kan.

“When the batteries in my Ryobi electric lawn mower went out, I didn’t want to pay $50 apiece for re- placement batteries from the company. So I used two 12-volt lawn mower batteries that only cost $18 each. They’re larger so I had to modify the battery holders and raise the main cover up about 3 in. But the mower runs longer on them and they charge up fine with the mower’s regular charger. I’ve used it two years this way. If your mower has a 24-volt system, you have to connect the batteries to produce 24 volts.”

From the archive · Full text
Reader shop tip

David P. Campbell

David P. Campbell, Elnora, Ind.

“I ground a slot in the bottom of the drawbar pins on my Deere 4020 and 2520 tractors. Makes it easy to use a screwdriver to turn and push up on the pin when you need to lengthen or shorten the drawbar as needed for whatever job you’re doing.”

From the archive · Full text
Reader shop tip

Brian Haubrich

Brian Haubrich, Glenbain, Sask.

Brian says this is one of the best ideas he’s ever had. He hangs tool racks inside the access door on his Case IH combine. He says it’s much more convenient that trying to carry a toolbox on the combine. He also hangs toolracks on his Conserva Pak air seeder. He says you have to twist the hooks on the racks so wrenches won’t jump off on rough ground.

From the archive · Full text
Reader shop tip

Emil E. Smith

Emil E. Smith, Franklin, Wis.

“I came up with a cheap way to replace expensive air filters on riding mowers. I bend 1/4-in. hardware mesh to the form of the old filter, then cut a piece of cloth and wrap it around the outside of the mesh and trim any loose strings.

The suction coming out of the carburetor will keep the cloth tight against the mesh and away from the carburetor’s throat. When the cloth gets dirty, I just throw it away and put on a new one.

“I’ve used this idea for two years on a Yard Man 14 hp riding mower, an MTD 10 hp riding mower, and on a Troy Bilt rototiller. I think the same idea would work on any kind of small engine that has a paper air filter. Not only do you save the cost of a new filter, but the engine seems to breathe a lot easier, probably because air flows through the cloth better.”

From the archive · Full text
Reader shop tip

Shambaugh Farms

Shambaugh Farms, Oakley, Ill.

These two wheeled carts, equipped with short ladders and spring-loaded feet, are much appre- ciated in T.J. Shambaugh’s shop. He got them at a close-out auction held by a pipe supply firm.

One cart has three shelves and the other two. He attached a cabinet on one of the units for storing tools and other supplies. The curved handlebars work great for guiding the units about, and the spring-loaded feet keep them in place.

From the archive · Full text
Reader shop tip

Alan MacLean

Alan MacLean, Kingston, Ontario

“In the last issue of FARM SHOW, a reader described how to rotate a dead tractor engine by placing another tractor back to back with a driveshaft between the two pto shafts. A transmissioin with its shift lever in reverse was used in the driveline in order to rotate the engine in the right direction.

“I’ve used this approach several times but without the extra gearbox. Some years ago Massey Ferguson tractors featured what they called a ‘ground-drive’ pto position for the selector lever. In this position, the pto shaft was rotated by the rear axle gears.

“Using one of these tractors, with the left rear wheel jacked clear off the ground and the transmission in reverse, rotates the pto backward, which turns the dead engine in the right direction. For safety, operators should remain on both tractors. Many pto-driven generators have driveshafts with 1 3/8-in. U-joints at each end, which is ideal for this purpose.”

From the archive · Full text
Reader shop tip

Douglas Fast

Douglas Fast, Dallas, Oregon

“I filled my above-ground refurbished fuel tank with 4,000 gal. of diesel fuel only to discover there was a crack on the lower side of the tank, which leaked about a half gallon of fuel per hour. Making sure the connection around the lid of the tank was airtight, I connected my shop vac to the lid to create suction (negative pressure) which stopped the leak. I was then able to apply an epoxy sealant to the crack, which sealed the leak. After 24 hours I shut off the shop vac, and my problem was solved.”

From the archive · Full text
Reader shop tip

R. E. Dickinson

R. E. Dickinson, Theodore, Alabama

“My neighbor came up with this vent for plastic fuel cans. After draining and drying the inside of the can, drill a hole in location as per the drawing using a 1/2-in. drill bit. In-vert the can and shake out any drill cuttings (that’s why you need a dry can). Push a 3-ft. length of wire through the drilled hole and then out the filler spout hole.

“Remove the valve cap and core from a new tubeless tire stem and thread it onto the end of the wire. Pull the stem out through the vent hole.

“To vent the can while dispensing fuel, I simply take the cap off the stem.”

From the archive · Full text
Reader shop tip

Jerry Foster

Jerry Foster, Magalia, Calif.

“In your last issue someone installed an electric plug-in socket on his Lincoln welder so he could use it to operate power tools. He removed the back of the welder and ran wire to the 110-volt socket, including a ground wire.

“Don’t do it. A welder connects with a 3-prong plug. Two of the prongs are at 110 volts with respect to ground (220 volts measured one to the other). The third prong is a safety ground. There’s no ‘common’, which is sometimes called ‘neutral’, ‘return’, or ‘power ground’. So to obtain 110 volts, one would connect between this prong and one of the ‘hot’ prongs. That way you’d be using the safety ground as a power return, a highly unsafe (and illegal) condition.”

From the archive · Full text
Reader shop tip

Richard Peterson

Richard Peterson, North Bloomfield, Ohio

Peterson is totally sold on Total Seal (800 874-2753; www.totalseal.com) gapless piston rings. He first used a set 14 years ago when overhauling a 950 Minneapolis Moline with a friend.

“When we backed it out of the shed, it was the first time we’d ever seen it without a blue haze coming out of the pipe at idle. It has nearly 6,000 hours on it, and it still runs fine.” Peterson has since used Total Seal gapless rings on other tractors and a Chevy pickup engine. He really likes the customer service he gets when he calls the company direct.

“The tech reps are very helpful.”

From the archive · Full text
Reader shop tip

Gary Combs

Gary Combs, Concord, Ohio

“My 1989 Belarus 25 hp tractor used to steer like an old steel-wheeled Fordson. Now it steers so easy I feel like the King of Siam when I’m driving it. I added power steering to my 1989 Belarus 25 hp tractor, using parts I bought at a forklift truck company.

“My total cost was less than $400.

“The tilt steering wheel, column and servo valve came off a forklift truck, while the hydraulic pump and hoses are off a 1988 Toyota pickup. I mounted the pump on an angle iron bracket bolted on top of the engine. I bought a new hydraulic cylinder and bolted it to one of the tractor’s front spindles. There was limited space for a hydraulic reservoir, so I had my friend Alvin Zinz build a small 2-quart reservoir out of two 1-lb. propane tanks. Zinz cut the bottoms out of the tanks and soldered them together in the middle.

“I replaced the tractor’s two 6-volt batteries with one 12-volt battery, which left more room for the hydraulic reservoir.

“When I added power steering I also completely restored the tractor. Now it’s like I have a whole new tractor. I paid $100 for the servo valve, and my friend Tom Latchaw gave me the pump. A new servo valve would have cost about $500 and Belarus sells an add-on power steering kit for $3,000, so I saved a lot of money. The only part I bought new was the hydraulic cylinder. I paid $89 for it at Tractor Supply Company. The steering wheel that I bought was cracked so I replaced it with one off an old MG car.

“I think the same idea would work on any tractor that doesn’t have power steering but is equipped with a steering arm. My thanks to Tom and Alvin for their help and ideas. It made this project much easier to do.”

From the archive · Full text
Reader shop tip

John Schumacher

John Schumacher, Mitchell, S. Dak.

“I had trouble losing shanks off my DMI Tiger Turbo II ripper. The problem was solved by bolting a 1/4-in. log chain to a brace on back of the shank, and then attaching the chain to a heavy bar that the shank bolts onto. If the shank breaks off it isn’t lost but instead just drags along on the chain.”

From the archive · Full text
Reader shop tip

Jack B. Elliott

Jack B. Elliott, Florence, Ontario

“I buy surplus furniture dollies that ride on four caster wheels and place a 2 by 3-ft. wooden box on them for use as a small work bench when working on small motors, etc., They can be moved around the shop as needed. The boxes can hold up to 600 lbs.”

Shop feature stories

From the archive · Full text
Feature story

High-Wear Parts For Hammermills, Hay Processors

Featured source:

If hammers, flails, rods and screens are failing faster than you think they should, it may be time to check out Doran Manufacturing. Randall Doran says they use higher quality steel than OEM’s and harden it, too.

“We combine high-quality steel with heat treatments to harden off the parts that wear,” says Doran.

“Our parts have a substantially longer life than OEM parts under the same conditions, and we’re usually priced 15 to 20 percent lower.” Doran sells parts to farmers throughout the country, though the majority of their business is in the Midwest and Great Plains states. Over the past 14 years they’ve made parts for most of the hay tubs and hammer mills in use.

“In most cases, all we need is the make and model,” says Doran.

“If the equipment is old or intended for a special use, we might require measurements. Regardless, every part is made the old fashioned way: Manually.”

Doran credits his employees’ craftsmanship for the quality of the parts produced.

“We’re more expensive than some after market competitors, but we feel we make a better product,” he says.

“We use raw materials suited for the application and tailor the part for the characteristics of each machine.”

Parts can be ordered direct from the company by phone, fax or email. A catalog is also available.

Contact: FARM SHOW Followup, Doran Manufacturing, 1230 870th St., P.O. Box 147, Harlan, Iowa 51537 (ph 712 755-7980; fax 712 755-7877; [email protected]).

From the archive · Full text
Feature story

They Match Paint As Old As The 1930’s

Featured source: Tony Logemann

Need a little touch up paint on an old vehicle, motorcycle or recreational vehicle? Whether it’s a 1937 Rolls Royce or a 1940 Ford pickup, Tower Paint can match it.

“We have a database of colors that we can formulate to duplicate classic colors starting from 1930,” says Tony Logemann, general manager for the Oshkosh, Wis., paint business.

“We sell to a lot of hobbyists that have classic cars, airplanes and boats.”

The store’s main business is selling paint, wall coverings and window treatments, but they found a niche mixing classic colors to sell primarily in aerosol cans. While most of their customers own classic cars, Tower Paint can match paint from other vehicles, including unusual farm equipment.

“We fill any size order, from one to 1,000 cans and ship them all over the country,” he notes. Tower Paint uses quality Dupont and PPG paints and also offers touchup bottles, pints, quarts and gallons of custom colors. The business’s website makes it convenient for customers to find the color they need.

Prices start at $18.95 for a 16 oz. can of enamel spray paint. Price breaks are available for multiple can orders.

Contact: FARM SHOW Followup, Tower Paint & Design Center, 922 Oregon, Oshkosh, Wis. 54903 (ph 800 779-6520; www.towerpaint.com)

From the archive · Full text
Feature story

Modified Drill Bits Fit Worn Chucks

Featured source:

If your drill bits are slipping in the chuck, your chuck may be worn. To solve the problem, Joe Gibbs came up with a way to modify bit heads to give the worn chuck something to grip.

“As a chuck ages, it’s hard for it to hold a bit when it hits resistance,” says Gibbs.

“I found out that it helps to grind flat faces on the drill bit ends.”

To get three even faces, Gibbs has come up with a simple jig. He cuts a triangle with 4-in. sides from a piece of 2-in. thick scrap wood. An old chuck is then mounted in the triangle’s center and an emery wheel mounted on Gibbs’ drill press.

“I mount the drill bit with the cutting end in the chuck and slide it against an emery wheel on my drill press,” explains Gibbs.

“When I have a slight face on one side, I just turn the wood block to the next side and slide it back to the emery wheel.”

Contact: FARM SHOW Followup, Joe Gibbs, 1115 Club Meadows Drive, Columbia, Mo. 65203 (ph 573 818-0347).

From the archive · Full text
Feature story

Hydro Kit Beefs Up Specs On Older 4-WD Tractors

Featured source:

Thirteen years ago (Vol. 20, No. 2), FARM SHOW featured an add-on dedicated hydraulic system for older model Versatile tractors, which allowed them to handle modern high-capacity implements. Since then, Atom-Jet Industries Ltd., has added Massey Ferguson, Case IH and Steiger tractors to the list of makes for which their kit is available.

The 4000-series Massey Ferguson, 9000-series Case IH, most Versatiles (including Ford-Versatile designation 6 models and 1150’s), and several Steigers (with Cummins or Cat engines), can all be upgraded with Atom-Jet’s standard open-center system. The bolt-on upgrade kit provides one dedicated high-flow circuit over and above the tractor’s existing system. With variable flow rate control of 13 to 26 gpm at 2,000 psi, (controlled by a toggle switch in the cab), you can optimize engine rpm and fan speed, boosting hydraulic power for running high-flow implements such as air seeders.

“Installation on Versatiles involves drilling some mounting holes for the pump bracket and making sure the pulley alignment between the crankshaft and the pump is accurate. We have various different ways of mounting on other makes of tractors,” says Curtis Gouldie, Hydraulic Specialist with Atom-Jet.

“In the typical installation for most other models, the kit’s auxiliary pump is driven off the front of the engine and mounts below the crankshaft pulley. A front-mounted 30-gal. oil reservoir offers a dedicated fluid supply.”

In both configurations, if the producer is handy at all, he can usually do the installation himself.

Older tractor owners also have a second option open to them, which is a closed-cen-ter alternative with a few more features.

“If you require active down pressure, want to pull an air seeder with dual fans, or have variable rate technology, our closed-center kit will fit the bill,” Gouldie says.

“It’s a load-sensing system that boosts maximum flow to 40 gpm with a 3,000 psi rating. It has an in-cab, electric, proportional joystick, so you don’t have to plumb hydraulic lines into the cab. It’s also much quieter.”

The open-center kit costs about $6,000 (Can.) and the beefier closed-center kit is priced between $11,000 and $15,000 (Can.), depending on options.

Both kits include every part needed for the project, right down to quick-connect couplers. They also come with a 2-yr. parts and labor warranty.

Contact: FARM SHOW Followup, Atom-Jet Industries Ltd., 2110 Park Ave., Brandon, Manitoba, Canada R7B 0R9 (ph 800 573-5048 or 204 728-8590; fax 204 726-5734; [email protected]; www.atomjet.com).

From the archive · Full text
Feature story

Add-On Laser Guide For Chop Saws

Featured source:

when the blade starts to rotate and shuts off when it stops,” says Bob Bonsi, Laser US, Inc.

“Other units have to be turned on, and if you don’t notice, they stay on, wearing out the battery. I’ve had one on my circular saw for several years, and the battery hasn’t run out yet.”

Bonsi’s son Paul invented the laser guide after the laser site company he worked for moved overseas. He focused on developing a laser guide for chop saws.

“He started manufacturing this unit only to discover a major tool company had stolen the idea and was selling saws with it in place,” says Bonsi.

“They even had his patent number on it.”

His son sued but due to lack of funds settled largely for the rights to make and sell the unit himself. Disabled by a brain aneurysm, his father is helping him with manufacturing and marketing.

“It has been great to hear from people who have bought one,” says Bonsi.

“One fellow said it was better than toilet paper.”

They now make and sell laser guides for a variety of circular saws, miter saws, chop saws and others. Model #15500 is designed for radial arm saws and others that use a nut to hold the washer and blade in place. Model #12200 fits 95 percent of all saws that use a bolt or screw to hold the washer on. Both guides are priced at $24.95. An earlier model introduced for circular saws is now being phased out. Bonsi says those $29.95 laser guides have been marked down to $19.95.

Laser US guarantees the laser for a year. The entire unit is 2 in. in diameter and about 1/3 in. thick.

“Installing it is easy. Just replace the existing washer with our unit,” says Bonsi.

Contact: FARM SHOW Followup, Laser US, Inc., P.O. Box 2575, White City, Oregon 97503 (ph 541 450-1204; 888 767-1262; [email protected]; www.laserusinc.com).

From the archive · Full text
Feature story

How To Fix A Rusted Fuel Tank

Featured source:

Sooner or later, all steel fuel tanks are likely to have the same problem. They will begin to rust, flake and develop pinhole leaks.

But there’s an inexpensive way to repair old tanks, says Gackle, N. Dak. farmer Roger Gutschmidt. He successfully fixed his own fuel tank after noticing that rust flakes had started to collect in his fuel filter.

“The first thing I did was clean out the inside of the tank with the pressure washer, using hot soapy water,” he explains.

“This removed the loose flakes, which I could look for by using a flashlight to see inside the tank. Then I tipped the tank upside down and let it drip dry for a few hours.”

Next, Gutschmidt poured about a pint of a product called “POR-15 U.S. Standard Fuel Tank Sealer” (POR stands for Paint Over Rust) into the tank through the top, immediately tipping the tank “every which way” so the product could completely coat and adhere to the entire inner surface. Finally, he poured out any excess product.

“Of course, you have to use some common sense. You can’t let the product run into a fuel line and if you have a shut off valve in the bottom of your tank, you have to take that out and screw a pipe plug into its place.”

Gutschmidt let the product dry for 24 hrs.

before reinstalling the tank into the tractor.

“This is an amazing product. It gets hard as a rock and leaves a glossy coating that you can’t scratch off with your fingernail. It’s a permanent fix,” he explains.

This company also makes a wide selection of other products, which Gutschmidt highly recommends. They include a high-tempera-ture paint (for restoration work on tractor frames and firewalls), rust preventative paint, engine enamel, and repair putty and fillers.

“You brush the paint on right out of the can. It’s a lot more expensive, but if you’re going to go through the work of fixing an older piece of equipment, you want something that’s going to last,” he points out.

Some of the major automotive supply stores sell POR-15 products, or you can buy online at www.por15.com. A quart of fuel tank sealer is $36.95 plus shipping. The company’s website says the product is impervious to all fuels, including the new Stage II fuels which have a high alcohol content.

Contact: FARM SHOW Followup, Gutschmidt Manufacturing, LLC, Roger Gutschmidt, 6651 Hwy. 56, Gackle, N. Dak. 58442 (ph 701 698-2310; [email protected]).

From the archive · Full text
Feature story

Kit Retrofits Diesels For Multiple Fuels

Featured source:

A new flex fuel kit from Dino Fuel Alternatives lets you chop fuel costs and clean up engines by making it easy to burn, says James Tracy, one of Dino Fuel’s owners.

Tied into the ignition system, it makes flipping back to diesel from an alternative fuel as easy as flipping a switch. After a fuel system reverts to diesel the engine only stops once the system has been purged completely of alternative fuel.

“Our system lets customers run on alternative oils when they want without concern over temperatures, and they don’t have to be mechanics,” says Tracy.

“Customers like the fact that once the system is installed, it moni-tors itself, turning on and off automatically. Flip a rocker switch, and the automatic system becomes fully manual.”

The company’s Vegi system is a self-con-tained, heated and fully automated unit developed originally for waste vegetable oil. It’s now certified to burn straight diesel, B100 (100 percent biodiesel), straight vegetable oil (new and filtered waste), as well as kerosene and several other fuels. Installing the kit leaves the original OEM fuel system un-touched.

Dino Fuel was the first to use temperature and pressure based switching instead of solenoid valves. The system consists of a compact modular aluminum block with oil filter, valves and sensors. When activated, the higher-pressure alternative fuel overrides the diesel fuel system, forcing the diesel fuel back into recirculation. If the alternative fuel pressure drops for any reason, diesel flows back into the engine and quickly purges any re-maining alternative fuel.

The Vegistroke V3 Manifold kit is recommended for Ford Powerstroke engines. The VegiRam CRV1 Manifold fuel system is designed for 5.9-liter Cummins engines in Dodge trucks. Prices vary from $1,900 with manual only control to $2,975 for a fully automatic with manual option control system. Tanks are extra, and components are available individually as well as in kit form.

Three models of alternative fuel tanks are available. Two are designed for placement in the truck box, and the third is a belly tank. Tanks have an engine coolant based heat ex-changer built in to prevent fuel gelling. They range in size from 40 to 90 gal. and are priced from $500 to $1,187.

Tracy says the company is concentrating on corporate and government fleet conversions. Consumer sales have fallen off with diesel prices.

“Most people get complacent with diesel at $2 per gallon,” he says.

“People concerned about the environment or independence from foreign oil are still buying. The others are waiting for the price of oil to go back up.”

Contact: FARM SHOW Followup, Dino Fuel Alternatives, 7911 NE 33rd Drive, Suite 360, Portland Oregon 97211 (ph 866 369-5172; [email protected]; www.dinofuelalternatives.com).

From the archive · Full text
Feature story

Adjustable-Height Welding Table

Featured source:

Kit Talbot is the CSI facilitator at Schulte Industries of Englefeld, Sask. He recently sent photos to FARM SHOW of a heavy-duty, adjustable welding table he and other employees made from scrap steel.

“We needed a welding table that would be ergonomically friendly. Unfortunately, the ones on the market were either priced too high or were built too light,” says Talbot.

The welding table measures 36 by 48 in. and is designed with a U-shaped opening so the welder always has his work close to him. The top of the table is made from 3/8-in. steel plate, with “X” iron braces underneath for added strength. The legs and frame are made from 2-in. sq. tubing. The operator moves the table with a 10-in. implement hitch jack, lifting one end of the table. The legs on the other end are fitted with two 4-in. solid caster wheels. By using a hand-operated jack the table can be raised from 36 in. to 46 in. high.

One side of the table has a small open grid made up of replaceable 1/4-in. thick metal straps.

“The grid allows the operator to do cutting work without having to hang the ob-ject over the edge of the table,” says Talbot.

“The other side of the table is designed to support a homemade bench vise, which is held in place by inserting the base of the vise through a hole in the table and then tightening a bolt. There are also a series of holes for storing hammers and other tools.

“I built it because I couldn’t find anything suited to my needs at a reasonable price,” says Talbot.

“Some commercial models sell for up to $4,000. I used mostly dropoff material from our shop which kept the cost way down. I didn’t use any blueprints - I just got a piece of paper and pen and started drawing it out on the floor.”

Contact: FARM SHOW Followup, Kit Talbot, Schulte Industries, P.O. Box 70, Englefeld, Sask., Canada S0K 1N0 (ph 306 287-3715; [email protected]).

From the archive · Full text
Feature story

Swinging “Partition Door” Closes Off Room Inside Shop

Featured source:

Mark Musser, Beecher City, Ill., needed a tall work space in his shop building where he could work on big machinery during the winter. But he didn’t want to heat his entire shop. So he built a large swinging “partition door” out of lightweight, 3-in. thick, insulated siding taken from a refrigerated semi trailer.

The door measures 20 ft. wide by 15 ft. high and hinges on three large steel pins. When closed it forms a 20-ft. wide by 30-ft. long room, with an overhead door at the opposite end.

For access into the area when it’s closed off, Musser built a “walk-through” door made up of 6-in. wide strips of hanging and over-lapping carpet.

“The partition creates a small space where I can work on machinery. It’s like having a shed inside a shed,” says Musser.

“I got the reefer siding free from a friend who does demolition work at a truck salvage yard, so it didn’t cost much to build.

“I use four 500-watt spotlights and a small propane heater to heat the area. The partition folds back against one of the building’s walls when not in use.”

Contact: FARM SHOW Followup, Mark Musser, 2361 E. 1950 Ave., Beecher City, Ill. 62414 (ph 618 487-5837).

From the archive · Full text
Feature story

“Rare Parts” Out-Perform OEM Steering And Suspension

Featured source:

If the folks at Rare Parts can’t find the steering or suspension component you need, they’ll make it for you. The company carries 15,000 different part numbers in stock. The full service machine shop also makes and markets heavy-duty replacements for OEM steering components known to fail early, as well as custom parts as needed.

“If we don’t have the part you need in stock, send the old one to us,” says Marshall Giorgi, Rare Parts, Inc.

“ Often it only takes a day to make a duplicate.”

In addition to older vehicles, Rare Parts specializes in hot rods and muscle cars, collector cars and motor homes. However, parts have also been designed and manufactured for tomato harvesters and more traditional farm equipment, ATVs and even missile carriers for the military. On custom-made parts, the original is duplicated down to the markings on a cover plate.

Although the company’s focus is on steering and suspension, they have the ability to do injection molding as well as heat treating. OEM parts up to 2 1/2 in. can be strengthen-ing by heat treatment.

Rare Parts maintains a full testing and inspection facility. Their parts are compared to OEM through cycle, impact and tensile testing procedures to make sure they’re better than original. The company warrantees parts to buyers for as long as they own the vehicle.

Two popular products the company offers includes a heavy-duty track bar for Dodge trucks and a heavy-duty tie rod assembly for Chevy and GMC pickups and SUV’s, as well as the Hummer H2. Rare Parts says its track bar offers an additional 13 degrees of stud swing over the OEM bar, and is bigger and stronger, withstanding twice the force in tensile testing.

“In the case of the tie rod assembly, we heard the same story from a number of customers. The shaft where the inner met the outer was bending and snapping,” says Giorgi.

“The Chevy Silverado was the vehicle that was first brought to our attention. Anytime we have people tell us about parts failure and we can see the need, we build and stock the parts.”

Like the track bar, the new tie rod assembly has been designed to eliminate the weak point, with both inner and outer components enlarged and strengthened.

Contact: FARM SHOW Followup, Rare Parts, Inc., 621 Wilshire Ave., Stockton, Calif. 95203 (ph 209 323-3923 or 800 621-2005; fax 209 948-2851; [email protected]; www.rareparts.com).

From the archive · Full text
Feature story

Heavy Duty Shop “Elevator”

Featured source:

The loft storage area in Gene Boehler’s shop is much more useable now that he can get there by elevator.

The Farmersville, Ill., man operates a welding and repair service out of an old frame barn. He needed a way to take big parts and other items up to the hayloft for long term storage. His home-built elevator can lift up to 900 lbs. and rides up through an existing opening in the hayloft floor.

Boehler made the elevator using an electric winch and scrap steel. The winch is operated by a remote control attached to a 10-ft. long cord. The winch winds a cable that raises or lowers a 3 by 4-ft. platform made from metal grating.

A pair of pulleys give the elevator a 4 to 1 reduction on the cable lift, slowing it down and adding to its lifting ability.

“It goes up at a nice, comfortable slow speed,” says Boehler.

The elevator cage is made from spare shelving material and is hoisted by a heavy cross-shaped frame welded to four angle iron guides, which are held together by cross members. The winch and pulleys are supported by a frame built up in the loft.

“I’ve used it to haul everything from engines and transmissions to filing cabinets. I like it because I’m able to get a lot of stuff upstairs all by myself,” says Boehler.

“I bought the winch at Harbor Freight for $50 and paid about $100 for the pulleys. Everything else that I used I already had.

“ Contact: FARM SHOW Followup, Gene Boehler, 27299 Frontage Road, Farmersville, Ill. 62533 (ph 217 227-3220).

From the archive · Full text
Feature story

Specialists Provide All Things Hydraulic

Featured source:

If Georgetown Hydraulics doesn’t have the hydraulic equipment or component you need, they can probably make it. Their specialty is hydraulic power including everything from pumps and motors to pipes, fittings, clamps, couplers, adapters and valves. They even carry hydraulic-powered fans, chop saws, table saws and even ice cream makers.

Their portable hydraulic power units are used anyplace there’s a need for hydraulics and they custom build large power units to customer specifications. Put a 20 hp air compressor on a unit or an electrical generator and from 1 to 16 hydraulic pumps with out-puts of 1 to 100 gallons per minute. The largest unit they have built so far was 700 hp.

Georgetown offers six different diesel engine brands to choose from on the large, customized skid units. Power can also be provided by gas engines or electric motors.

Smaller portable hydraulic units are also available. Self-contained, 12-volt systems start at 1.8 gpm and 3,000 psi. Prices range from $380 to $490, depending on single or double acting, manual or remote controls. Wheeled units range in price from $800 to $2,500. Engines vary from four to 24 hp with hydraulic output that starts at 6 gpm and 1,500 psi and goes to 12 gpm and 3,000 psi.

Contact: FARM SHOW Followup, Georgetown Hydraulics, 343 Christiana Pike, Christiana, Penn. 17509 (ph 610 593-2753).

From the archive · Full text
Feature story

Tractor Engine Stand

Featured source:

“It works much like larger engine stands designed to hold bigger Cummins and Cat truck engines, but costs much less,” says Kenny Peters about his company’s new portable engine stand that’s designed to handle tractor engines.

The “Twister” has many of the same features found on larger engine stands. It comes with a standard bottle jack, a 60:1 gearbox, and a hand-operated crank. A pivot pin on back allows the engine to be raised up at an angle. The dolly can be removed by pulling back on the handle, allowing the stand to set on the floor as a stationary unit.

Three different adapter plates are available: Deere, IH, and 5.9 Cummins diesel engine. Several different colors are available.

Sells for $1,995 plus S&H. The adapter plates sell for about $100.

Contact: FARM SHOW Followup, The Twister, K & S Steel Products, 4620 S. Co.

Rd. 550 E., Greensburg, Ind. 47240 (ph 812 663-8567; fax 812 663-8698; [email protected]).

From the archive · Full text
Feature story

“Mini Pallet” For Hand Trucks

Featured source:

This new “mini pallet” for hand trucks makes it easy to get under heavy loads.

Made from 1/2 in. by 16-ga. tubing, the hand truck pallet measures 10 1/2 in. long by 20 1/2 in. wide by 1 in. tall. A pair of 1/2-in. sq. support tubes on the outside edges keep the load 1/2 in. off the floor, allowing you to easily slide the hand truck under the load.

“It eliminates the need to tilt the load back and then try to jam the hand truck under it,” says inventor Roger Kuntz, K-Tech, Grainfield, Kansas.

“It can handle any load up to 1,000 lbs. Works great with pails, boxes, batteries, etc. It can be used with any hand truck that has a ‘toe’ up to 3/8 in. thick, 18 in. wide, and 7 or more in. long. Another benefit is that it always keeps the load off the floor so it won’t get wet.”

Kuntz says he’s selling the product direct for now but is looking for a distributor.

Sells for $17.95 including S&H. Contact: FARM SHOW Followup, K-Tech, 5251 Co. Rd. X, Grainfield, Kansas 67737 (ph 785 673-5560).