Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 4 (2009)

Edwin Burtness

Edwin Burtness, Orfordville, Wis.

“It’s often frustrating to try to get newly mounted tires to hold air because of small gaps between the tire bead and rim. You can’t get enough air in through the valve stem to seat the bead. I solved the problem by removing the valve stem core and using a 3/8-in. hose and blow-off gun with the safety tip removed, allowing a larger volume of air to enter the tire. When the tire seats on the rim the valve core can be replaced, and then the tire is aired up normally.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.