Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 33, No. 4 (2009)

Scott Elias

Scott Elias, Standard, Alberta

“To re-move seized bolts or fittings from a casting such as a cylinder head, I just use a little heat and wax. I heat the area around the bolt and the bolt itself, then apply some wax (a small birthday candle works good) around where the bolt screws in. The wax will work its way down into the threads and then the bolt will easily come out.

“I’ve used this method many times with great results. I’ve even used it on an aluminum cylinder head, being careful not to apply too much heat. I’ve never had much luck with penetrating fluids, but the wax method works every time.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.