Mixing kerosene and automatic transmission fluid together in a 50-50 mix produces a low-cost penetrating oil, says Bill Burlew of Savona, N.Y., who has successfully used the idea for years.
He pours the two fluids into an old dishwashing soap squeeze bottle, which holds about 1 1/2 pints of liquid.
“I call it jungle juice. It’s super stuff and works as well or better than the high-dol-lar penetrating oils on the market that cost up to $15 per can,” says Burlew.
“My total cost per bottle is no more than $2. The kerosene breaks down the viscosity of the transmission fluid and allows it to penetrate easier. If you want you can use diesel fuel instead of kerosene.
“I came up with the idea one day when I ran out of penetrating oil. I didn’t want to drive to town so I thought I’d give this idea a try. I’ve used it on stuff that was rusted all to heck, such as when I took the seats out of a van. The bolts were so rusty that when I tried turning them they just made a screeching noise. After I applied some of my homemade penetrating oil I had no problem loosening the bolts.”
Contact: FARM SHOW Followup, William W. Burlew, 8961 Cty. Rt. 16, Savona, N.Y. 14879 (ph 607 776-4696).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.