Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 1 (2010)

Ken Greenia

Ken Greenia, St. Clair, Mich.

“To remove a stud that has broken off flush, I lay a flat washer over the broken stud and weld the two together. Then I weld a nut to the washer and remove the stud by working it back and forth. On a really tough stud, first I drill a hole in the middle of the stud and then jam in a small welding rod so I can heat the inside of the stud, which causes it to shrink and loosens it up. Then I weld the washer and stud together and weld a nut to the washer. I’m a retired Deere dealer, and over the years our shop mechanics often called on me to remove broken studs so I know this method works. I’ve removed literally hundreds of studs this way.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.