Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 1 (2010)

Robert Walker

Robert Walker, Mocksville, N.C.

“I made this drill press vise out of 1⁄4-in. thick by 2-in. angle iron, a piece of 6-thread-per-inch, 3⁄4-in. dia. threaded rod, and some other scrap material. I also made one for my brother-in-law and for a neighbor that opened to 12 in.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.