Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 3 (2010)

Carl Boutilier

Carl Boutilier, Freeport, Ohio

“I needed to make wheels for a school project and I needed them right away. I came up with a quick and easy way to make them out of wood scraps.

“I made a T-shaped holder out of wood that slides in the groove on the table saw. The piece that extends toward the blade has holes drilled 1 in. apart in it. I just put a pin in the center of a square block of wood, fit it into a hole, and then just push the piece of wood back and forth through the saw blade, rotating it a little bit each time until it’s perfectly round. This was a quick and easy way to make a wheel.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.