Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 34, No. 6 (2010)

How To Remove Spot Welds Fast

Featured source:

You can quickly remove spotwelds on sheet metal or steel up to 1/4 in. thick with this attachment for handheld drills. The Blair Premium spotweld cutter consists of an arbor with a pilot on it that helps line up the hole, and a cutter that screws onto the arbor. The cutters look somewhat like a drill bit except they’re hollow and have teeth with multiple angles on them. Both the pilot and cutter are replaceable, and different size cutters and pilots are available.

“It works somewhat like a hole saw, only it works much better. It’s almost like having a hole saw on steroids,” says Greg Londrigan, Blair Equipment Co., Flint, Mich.

“It works great for car restoration or auto body repair work, where you want to remove spotwelds from body panels. You can also use it to drill plug holes, where you drill a hole through one piece of sheet metal and then lay another piece on top of it and then weld in that hole.” Premium spotweld cutters are available individually ($27.95 plus S&H) or in kits with 3 cutters ($46.35 plus S&H) or 7 different sizes of cutters from 5/16 to 3/4 in. in dia. ($84 plus S&H). Contact: FARM SHOW Followup, Blair Equipment Co., P.O. Box 2005, Flint, Mich. 48501 (ph 810 635-7111; info@ blairequipment.com; www.blairequipment.com).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.