Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 4 (2011)

Chad Travis

Individual tip 1 of 2 from this reader’s published contribution.
Chad Travis, Drasco, Ark.

“I used scrap metal to make a safety cap for the oxygen cylinder I use with my acetylene welding torch. Safety caps are used when storing or transporting the cylinder. Commercial stem caps sell for about $50, but my only cost was time. The top ring is made from a length of 1/2-in. dia. rod rolled into a circle, and the base plate from 10-ga. metal. The ring and base plate are connected by a pair of welded-on metal plates. The cap’s threaded collar, which screws onto the oxygen cylinder, is off a commercial storage cap - I simply cut the bottom off. The safety cap is designed so I still have full access to the cylinder’s shutoff valve at the center top, and to a pair of gauges on one side.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.