Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 4 (2011)

Chuck Knipp

Individual tip 1 of 2 from this reader’s published contribution.
Chuck Knipp, Palco, Kan.
Chuck Knipp
Photo: FARM SHOW · Vol. 35, No. 4 (2011) · p. 36

“I have a lot of sockets in my shop without cases and nowhere to put them. So I made a socket holder using a piece of 1 1/2-in. angle iron mounted to the wall. I spaced the sockets out on the bar and then marked each location with chalk. Then I ground down the points on some nails and tack-welded them to the bar. After a little paint, I had a cheap, durable socket holder.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.