Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 4 (2011)

Hobart Stewart

Hobart Stewart, Republic, Mo.

“When I built my 32 1/2 by 82 1/2-ft. shop, I embedded a pair of steel rings made from 3/4-in. stock in the floor, about 25 ft. apart. The rings, which have an inside diameter of 6 in., are recessed below floor level so no one can stumble over them. A cover fits on top of each hole so we can drive or walk over them.

“They’re very handy for pulling or straightening equipment. We’ve used them to pull cylinders apart, to straighten vehicle frames, and to bend metal on equipment.

“As we built the shop. I dug a square hole about 1 ft. deeper than the floor and filled it with concrete. There’s about 1 1/2 in. of clearance between the top of the floor and the rings to make room for the cover.

“The rings are embedded deep enough that we can wrap chains or cables on them.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.