“The electronic ignition on my log splitter’s Wisconsin engine quit working, and they wanted $300 to replace the ignition module. Instead, I took a 4-cyl. distributor I already had and ground 3 of the 4 lobes off the camshaft, then bolted the distributor to the engine.
“Now, instead of the breaker points opening 4 times for every revolution of the distributor, the points open only once. To drive the distributor I drilled through the center of the engine crankshaft and installed a 1/2-in. dia. shaft. A length of hydraulic hose forms a coupling that connects the shaft to the distributor. The original clamp on the distributor is used to adjust engine timing.
“I already had all the parts I needed, including the coil. No problems after five years.”
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.