Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 35, No. 6 (2011)

Kenneth G. Gadd

Kenneth G. Gadd, Moose Jaw, Sask.

“The shallow, 3-in. high toolbox I bolted to the side of my Case 9280 4-WD tractor really comes in handy for storing any ‘flat’ hand tools such as pliers, vise grips, and socket wrenches. I made it out of 1/8-in. thick sheet metal. The toolbox bolts onto one side of the tractor just ahead of the operator’s platform and measures 16 in. long by 7 in. wide and 3 in. high. A divider inside the toolbox lets me separate socket wrenches from the rest of the tools. The toolbox lid opens out away from the tractor, providing a place to set wrenches or small pieces while I’m working on something.

“The nice thing about a ‘flat’ toolbox is that I can see whatever tool I need at a glance, without having to dig around for it. A surprising number of the hand tools I use are flat, so it’s a really useful toolbox. The biggest tool I have in it is a hammer.

“I also built a similar toolbox for my Deere 9500 combine.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.