Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 5 (2012)

Curtis Footh

Individual tip 1 of 2 from this reader’s published contribution.
Curtis Footh, Stanley, N. Dak.

“I built this portable service rack for my shop out of an old front end alignment rack that I bought at an auction for $150. I use it with tall jackstands and a high-lift hydraulic jack to change the oil and to do repair work on cars and pickups. The rack rides on a pair of old 4-ft. high steel wheels, making it easy to move in or out of my shop. I use a loader tractor to pick up the opposite end and steer it.

“The rack is about 25 ft. long including a pair of 5-ft. ramps. The wheel channels are 14 in. wide and spaced 6 ft. apart.

“The rack was originally fastened to the floor by a pair of steel I-beams. I bolted a pair of 2-in. angle irons on back in place of the I-beams and a pipe on front to keep the wheel channels stable.

“The wheels are attached to a pipe axle and can be removed by pulling a pin. The jack stands have steel discs welded on the bottom to keep them stable.

“The big advantage of this rack is the vehicle is high enough that I can sit up instead of having to lay down on a creeper.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.