Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 5 (2012)

Wesley Walker

Wesley Walker, Cooper, Texas

“I had a problem with the gearshift lever on my IH 86 Series tractor. The lever is made out of common bar stock and it wears around the vertical transmission shaft, which makes shifting gears difficult. To solve the problem, I cut the shaft hole in line with the bar and then welded a 3/8-in. nut on 1 side of the cut and a 7/16-in. nut on the other side. Then I put in a 3/8-in. bolt, dropped it over the shaft, and tightened the bolt. No more slack in the gearshift lever.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.