Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 36, No. 5 (2012)

Bob Depperman

Bob Depperman, Kennard, Neb.

He has been installing his own zerks on farm equipment for the past 40 years. He warns that zerk repair can be tricky.

“To install a zerk, lay the dust cap (inside up) on a block of soft wood, and use a punch to make a dent where you want the zerk. You want to place it so when the zerk is installed, it will clear the spindle nut. Flip the cap over and drill a 3/16-in. hole through the now protruding dent. The hole is perfect for tapping in a 1/4-in., 28-thread, automobile style grease zerk.

“If a zerk comes loose or won’t hold, you can braze a 1/4-in., 28-thread nut over the hole,” he says.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.