Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 1 (2013)

Gerald Westhoff

Gerald Westhoff, New Vienna, Iowa

“Holding pto and driveline components in a vise can be a challenge because it’s hard to hold them in place while turning the handle. After 30 years of working with pto’s and drivelines, we’ve developed a ‘C’ frame press that uses a special hydraulic jack and custom tooling to press bearing caps out of yokes; press bearing caps out of yokes to save the cross and bearing set; install a new cross and bearing kit; and hold pto halves so the safety shield can be removed.

“In addition, we designed a table with the ‘C’ frame press mounted to it, along with tooling to hold and align the pto drivelines while installing new parts. A back panel stores the tooling for easy access. The tooling works with American and Metric ag drivelines.

“We’re selling it through New Vienna Metal Works, Inc., a service center with a large inventory of American and metric pto yokes, cross kits, and shafting from Neapco, Weasler, G&G and others (ph 563 921-3445; www.NVmetalworks.com).”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.