Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 1 (2013)

4-Speed Drill Press Works Great

Featured source: Justin Kelzer

The 1/4 hp, 4-speed drill press Justin Kelzer built consists of an antique Champion #97 post drill with a pulley drive attached. Kelzer added a motor and transmission and mounted everything to a wood frame.

“I wanted a drill press and had been looking for an old post drill I could modify,” explains Kelzer.

“The seller’s wife had given him a posthole auger as a present.” The 1/4 hp motor was an old one Kelzer had found as he cleaned out his grandfather’s farm. Though small, it provides plenty of power, thanks to the 4-speed transmission it drives.

“The transmission is from an old Gamble riding lawn mower,” says Kelzer.

“It lets me control the speed. I can drill as slow or fast as I want. Sometimes I use the neutral, and I’ve run it in reverse to back out of a hole.” To mount the transmission, Kelzer cut out the deck plate from the lawn mower with the transmission’s shift pattern. He welded a piece of angle iron to the plate, mounted the transmission to it and bolted it all to the wooden frame of the press. Contact: FARM SHOW Followup, Justin Kelzer, 1312 Apron Rd., Randall, Minn. 56475 (ph 320 360-5875).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.