Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 37, No. 5 (2013)

Harold Fratzke

Harold Fratzke, Cottonwood, Minn.

“I made a portable hydraulic press that can be used with any hydraulic jack.

“The portable press measures 12 in. wide by 8 in. deep and about 2 ft. high. The base is made from 1/2-in. thick railroad iron and has four legs made from 2 1/2 by 2-in. sq. tubing welded onto it at each corner. A 1/2-in. thick flat railroad plate is welded on top of the legs and has a 2-in. dia. hole drilled into it at the center.

“It’s built strong and works great with standard 10 to 20-ton hydraulic jacks. It weighs only about 20 lbs. so I can easily lift it in back of my pickup if I need to take it somewhere. Works great for punching shafts out of sprockets and gears, for punching out holes in metal, and for bending iron. However, if I built another one I’d use telescoping legs that could be adjusted up or down to make room for longer shafts.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.