Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 38, No. 4 (2014)

Leonard Seltzer

Leonard Seltzer, Manhattan, Ill. (ph 815 478-3578)
Leonard Seltzer
Photo: FARM SHOW · Vol. 38, No. 4 (2014) · p. 36

“I came up with a handy multi-purpose micrometer stand for my shop. It’s a simple way for machinists to take precision measurements and costs much less than commercial micrometer stands.

“The stand uses a spring-loaded clamp to hold the micrometer. It works like a third hand. I riveted one side of the clamp to a curved 1/2-in. dia. bolt, which screws into a nut welded on top of a 4-in. dia., 3/4-in. thick round metal base.” Seltzer is willing to make plans available for a fee.

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.