Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 1 (2015)

Cameron Messinger

Individual tip 3 of 3 from this reader’s published contribution.
Cameron Messinger, Hummelstown, Penn.

“Here’s a handy tip for installing the head on a small engine. If it’s an overhead valve engine, make sure both valves are shut when you put the head on, because it’s not easy to put the head on and fight against a valve spring at the same time. Also, take 2 or 3 bolts the same size as the head bolts and cut the heads off.

“Thread the bolts a couple of turns into the block and then slide the head on over the headless bolts. The bolts will align the holes precisely, allowing you to then put in the original head bolts. Bolt the head on with a couple of head bolts, remove the headless bolts, and then tighten the head bolts.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.