John Houston, Davidsonville, Md., was left with a big mess in his shop whenever he used his DeWalt wood planer equipped with a built-in chip blower. To solve the problem, he hooked up a 7-ft. long plastic hose to a port on the planer and ran the hose into a wheelbarrow that he covered with landscape fabric.
“I use the planer for surfacing roughcut wood. The blower on it directs chips outside the machine through a 4-in. port. However, the blower is so strong I can’t use the planer inside my shop without making a mess and having to breathe in a lot of dust. I tried parking the planer in the shop’s doorway and blowing the chips out into my yard, but that made a mess, too.” He clamped one end of the 4-in. dia. hose onto the blower port and placed the other end into the wheelbarrow. Then he laid the landscape fabric over the wheelbarrow and clamped it onto the sides. Contact: FARM SHOW Followup, John Houston, 3821 Patuxent River Rd., Davidsonville, Md. 21035 (ph 301 370-4890; [email protected]).
Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.
Comments and votes
Have you tried this idea? Mark it helpful and share how it worked in your shop.