Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 2 (2015)

Paul Peyton

Individual tip 2 of 2 from this reader’s published contribution.
Paul Peyton, Ava, Mo.

“I recently had a Jet 15-in. planer that would not start up. The motor turned slowly but could not reach full rpm’s. The starter capacitor was good. The problem was that the internal switch that turns the starter capacitor on and off had failed. I disassembled the motor, removed the bad switch, and ran wires to an external push-button switch. Now I just hold the push button until the motor reaches full rpm’s and then release. I saved about $250 that I would have spent on a new motor.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.