Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 2 (2015)

“Poor Man’s” Service Rack Made From PVC Tubing

Featured source: Robert Wallrath

Using pvc pipe, Robert Wallrath of Houston, Texas, built his own “service rack” for walk-behind mowers.

“It gives me easy access to sharpen blades and change belts or motor oil,” says Wallrath.

“Once the mower is on the service rack I can pull up a chair and do all my work from a sitting position.” The 4-legged service rack measures about 3 ft. sq. and is built mostly from 2-in. dia. pvc tubing. The mower’s wheels ride inside a pair of troughs made by cutting a pvc pipe in half. Wallrath tilts the mower’s front wheels up onto the rack, then lifts the mower’s rear end and slides the mower forward. A pair of long pipes, which swivel 360 degrees and also pivot up or down, are used to prop the mower up from the side or front. The rack’s legs pin into a series of holes in the tubing and can be adjusted narrower or wider depending on the mower. A short pvc “T” clamped onto one side of the rack serves as a funnel holder, or as an umbrella holder if Wallrath is working outside.

“The funnel always stays clean because it’s off the ground,” says Wallrath, who says he’s willing to sell plans for the rack. Contact: FARM SHOW Followup, Robert O. Wallrath, 7422 Nodding Pines Lane, Houston, Texas 77044 (ph 713 614-5538).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.