Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 5 (2015)

John Kennedy

John Kennedy, Seligman, Ariz.

“I bought an old Ford pickup equipped with a 360 cu. in. engine that wouldn’t turn over. The hood was off so the engine had been exposed to the elements for several years.

“I drained the water and oil out of the crankcase, but the starter motor wouldn’t budge it. I tried using a socket and bar on the crankshaft but that didn’t help, either. I even removed the spark plugs and filled each cylinder with diesel, and then waited a few days. No luck.

“I observed that only the no. 4 cylinder still had diesel in it, so I sucked the fuel out and filled that cylinder with Mystery Oil. Then I waited a few days and put a ratchet strap on the socket and bar. It moved just a bit so I was able to take up the slack in the ratchet strap. I kept that up, off and on, over the next 2 days until finally the engine broke free.

“Now the crankshaft spins like new.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.