Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 6 (2015)

Connor Bishop

Connor Bishop, Guilford, Ct.

“I needed a strap wrench to hold onto a Kohler engine flywheel as I tightened the flywheel nut, but I didn’t have a wrench that was large enough. Instead of buying one, I made one from a length of angle iron and an old serpentine belt. I cut a notch near one end of the angle iron where I permanently attached one end of the belt, and then cut 2 more notches several inches away. Once I’ve got the belt adjusted to the right length I wind it through the second 2 notches to lock it in place with the looped end of the belt over the flywheel. Works great and can be made smaller or larger as needed depending on what you want to use it on.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.