Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 6 (2015)

Simple Fix For Gathering Wheels On A Round Baler

Featured source: Fritz Dillon

Fritz Dillon, Glouster, Ohio, didn’t want to spend a lot of money to repair the gathering wheels on his 2008 Hesston 540 round baler, so he came up with a quick solution that saved him about $500.

“I use the baler to make 400 to 500 bales per year, so it gets a lot of use,” says Dillon.

“As a result, the rubber lining on the gathering wheels was starting to dry rot and even falling off the wheels. Once that happened, the baler started leaving a lot of hay in the field.” The company wanted $250 apiece for replacement wheels. Instead, Dillon removed the rubber lining from each wheel and welded a series of teeth off an old junked rake onto both sides of the wheels. The teeth are spaced about 2 in. apart and extend about 3 in. beyond the perimeter of the wheel.

“It works great. I think the same idea would work on any brand of round baler that’s equipped with gathering wheels,” says Dillon. Contact: FARM SHOW Followup, Fritz Dillon, 10877 Red Rock Rd., Glouster, Ohio 45732 (ph 740 767-4178).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.