Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 39, No. 6 (2015)

Salvage Seat Parts “Fixed” Deere 5525

Featured source: James Ryant

James Ryant could barely walk after a day in his new Deere 5525 90-hp. utility tractor. The problem was the seat.

“After a day of planting, I could hardly get off the tractor,” recalls Ryant.

“I checked with Deere and even New Holland dealers, as utility tractors from both use the same seat. Nobody had a solution.” The problem was that while the tractor seat could move up and down, there was no movement back and forth. Ryant realized he needed a ball bearing isolator like the seat on the Deere 4050 he had traded in.

“I went to a salvage yard and got one from a 4240, which had the same or similar seat to the 4050,” says Ryant.

“I installed the isolator between the platform and the seat. All I had to do was drill a few holes.” With his modified seat in place, Ryant went out to rake hay.

“It was like a new tractor,” he says.

“It took all of the shock out of the ride. Now the seat goes back and forth smoothly.” Ryant suggests anyone with a late model Deere or New Holland that doesn’t have a ball bearing isolator under the seat head for a salvage yard.

“The salvaged isolator cost me about $100,” he recalls.

“I would have paid the dealership much more for a better seat.” Contact: FARM SHOW Followup, James Ryant, 2899 210th St., Calmar, Iowa 52132 (ph 563 737-2780; [email protected]).

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.