Practical ideas from FARM SHOW MagazineSubscribe · Free issue · Send us your shop tip
Subscribe to FARM SHOW
Home / Vol. 40, No. 1 (2016)

Alan L. Carender

Alan L. Carender, Williamsburg, Ind.

“I’ve heard other people suggest this idea and I wanted to say that it really does work. If you have to replace a pressed-in bearing race, you can loosen it up by welding a bead all the way around the center of the race, then allow it to air cool and pull out the race. I have used this method hundreds of times in the last 40 years. I’ve also used this method on dry sleeves. I use 1/8-in. 6013 rod @90 amps or 1/8-in. 7018 rod @100 amps.”

Reproduced from the published FARM SHOW entry. Prices, coupons, availability and contact details are historical, not current offers. Reader methods are not universal instructions: follow manufacturer guidance, proper supports and safety practices, and consult a qualified professional when needed.

Comments and votes

Have you tried this idea? Mark it helpful and share how it worked in your shop.